12-Port Managed IEC 61850-3 Gigabit switch with 4 SFP ports, 100-240 VAC power input
Availability : 2-3 weeks
EHG9512-4SFP-AC
Availability : 2-3 weeks
EHG9512-4SFP-AC
The EHG9508/EHG9512 Series is a highly reliable Gigabit Managed Ethernet Switch. Its IEC61850-3 compliance allows it to be core part in the IEC 61850 network in power substations and control centers.
The IEEE1588 Precision Time Protocol capabilities allow the deployment of EHG9508/EHG9512 Series in networks with stringent time Synchronization requirements. It can act as hw-assisted transparent clock providing nanosecond-accurate correction-field packet-update and as a sw-assisted boundary clock, achieving a μs-level accuracy.
The device equips up to 8 10/100/1000BASE-T(X) RJ-45 ports and up to 4 1000BASE-X SFP ports. With its high performance, it provides network redundancy self-recovery mechanisms is less than 20ms on full load that enables the user to build a reliable network through a redundant ring topology. ERPS/STP/MSTP/RSTP/MRP (Client) and many other compatible rings are supported. With a Multifunctional web dashboard, its offers intelligent features such as Quality of service (QoS), Virtual LAN (VLAN), IGMP, Port mirroring and security.
The EHG9508/EHG9512 Series is designed to be used in core power utilities. It provides dual redundant power inputs with Reverse Polarity Protection and two sets of relay that allow the user build up a stand-alone fault alarm system. Its wide operating temperature of -40 to 85°C and DIN-Rail mounting capacities make it suitable to be used in remote substations where harsh environment and reliability is an issue.
| Switch Properties | |
| Processing Scheme | 8 |
| Vlan Table | 4096 |
| MAC-Base VLAN | 512 |
| VLAN ID Range | VID 1 to 4096 |
| Trunk Group | 4 |
| Static IGMP Groups | 128 |
| Dynamic IGMP Groups | 256 |
| MAC Table Size | 16K |
| Packet Buffer Size | 1.5 MBits |
| Jumbo Frame | 9216 Byte |
| Ethernet | |
| Standards | IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT IEEE 802.3z for 1000BaseX IEEE 802.3x for Flow Control, back pressure flow control IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.1X for Authentication |
| Protocols | IPv4, IPv6, IGMPv1/v2/v3, IGMP Snooping, GARP, GMRP, GVRP, SNMPv1/v2c/ v3, SNMP Inform, ICMP, Telnet, SSH, DHCP Server/Relay/Client, DHCP Option 66/67/82, BootP, RARP, TFTP, NTP Server/Client, SNTP, SMTP, SMTP (Gmail), RMON, HTTP, HTTPS, Syslog, MRP (Client), LLDP, IEEE 1588 PTP V1/V2, IEEE 1588 Hardware-Assisted End-to-End Transparent Clock and Software-assisted Boundary Clock, MRP (Client), 802.1x, EAP, RADIUS, TACACS+, Mirror port, QoS, ACL, Serial Console, U-Ring, STP, RSTP, MSTP, Redundancy Compatible Ring |
| Automation Profiles | Profinet CC-B compatible, Ethernet/IP, Modbus/TCP |
| MIB | MIB II, IF-MIB, SNMPv2 MIB, BRIDGE-MIB, RMON MIB Group 1,2,3,9, RFC RFC 1157, RFC 1213, RFC 1215, RFC 1493, RFC 1643, RFC 1757, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC 2571, RFC 2742, RFC 2819, RFC 2863, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415 |
| Power | |
| Input Voltage | 24-57 VDC 100-240VAC for AC series 110-370VDC for HV series |
| Input Current(MAX) | 0.63A @ 24VDC 0.16A @ 100VAC for AC series 0.12A @ 100VDC for HV series |
| Connector | 5-pin 5.08mm Lockable Terminal Block |
| Reverse Polarity Protection | Yes |
| Interface | |
| RJ45 Ports | 10/100/1000BASE-T(X) auto negotiation speed |
| Fiber Optics Ports | 1000BASE-X SFP slot |
| LED Indicators | PWR1, PWR2, Alarm, Run, Ring, Ring Master, RJ-45 Link/Speed, SFP Link, DI |
| Console | RS232 (RJ45 connector) |
| Relay Output | 1 relay outputs with current carrying capacity of 1A @ 24 VDC |
| DIP Switches | Ring Control and Profinet Setting |
| Button | Reset Button |
| Physical Characteristics | |
| Housing | IP30 protection, SPCC, Black |
| Dimension | 77mm x 145mm x 113mm (W x H x D) |
| Weight | 1000 g (HV) / 1200 g (Non-HV) |
| Installation | DIN-Rail, Wall mount (optional) |
| Environmental Limits | |
| Operating Temperature | -40°C~70°C (-40°F~158°F) |
| Storage Temperature | -40°C~85°C (-40°F~185°F) |
| Ambient Relative Humidity | 5 ~ 95% RH, (non-condensing) |
| Regulatory Approvals | |
| Safety | UL60950-1:2006. UL/IEC(CB) 61010-2-201 |
| EMC | FCC Part 15, Subpart B, Class A EN 61000-3-2 EN 61000-3-3 EN 61000-6-2 EN 61000-6-4 |
| PWR Automation | IEC 61850-3 (Including 6.10.3 Seismic test) , IEEE 1613 |
| Shock | MIL-STD-810G Method 516.5 |
| Drop | MIL-STD-810F Method 516.5 |
| Vibration | MIL-STD-810F Method 514.5 C-1 & C-2 |
| RoHS | Yes |
| MTBF | 20 years(TBD) |
| Warranty | 5 years |
