MB5904D-4P-G-DB-SFP

Industrial 4-Port Modbus Gateway, 100/1000BASE-X with SFP Slot, DB9

More details...

Availability : 2-3 weeks

Reference : MB5904D-4P-G-DB-SFP

More info
Data sheet
Download

4-Port Advanced Industrial Modbus TCP/RTU/ASCII Gateway

Industrial EMC protection, wide temperature operation, -40°C~85°C
Rugged metal case with wall or DIN-Rail mount
2 Fast-Ethernet ports or 100/1000 SFP slots
4 Software-selectable RS-232/RS-485/RS-422 serial ports, up to 921kbps
Isolated Redundant 12~48 VDC Power Inputs or powered (PoE models)through through the Ethernet cable (802.3af)
Embedded security with IPsec VPN
Bi-Directional Modbus TCP/RTU/ASCII conversion from Serial to Ethernet and Vice-versa, with advanced Modbus Options available
Configuration via Web Browser / Serial Console / Telnet Console / Windows Utility

Diverse Hardware Infrastructure
Modbus Gateway supports the four most commonly used communication standards, RS-232/485/422, and Ethernet. The ease-of-use
configuration utility provided with Modbus Gateway can quickly select the hardware interface , and easily switch to the existing
communication infrastructure. Industrial EMC protection and wide temperature operation capability make MB5904D ready for every
mission. And if cabling is an issue, the PoE-powered version can allow MB5904D to be powered through PoE.

Advanced embedded security
MB5904D embeds IPsec VPN Encryption, that allows you to tunnel your data securely throught the internet and prevent unauthorized control of your Serial Devices by malicious people.

Switching between Modbus Protocols

Modbus Gateway supports the standard Modbus protocol and is capable of converting any Modbus protocols between Modbus TCP, Modbus RTU, and Modbus ASCII for all supported hardware interfaces. All of this, in bidirectional mode: Ethernet and Serial ends can selected to
be either master or slave

Modbus ID Routing
Modbus Gateway supports various types of hardware communication interfaces, Modbus protocol conversion, and Modbus ID routing. Therefore the Modbus Gateway can integrate your existing and complex Modbus hardware configuration into a simple network that can be
easily managed.

Specifications
Network Interface
Speed	IEEE 802.3 10BaseT IEEE 802.3u 100BaseT(X) IEEE 802.3u for 100Base-X (SFP version only) IEEE 802.3z for 1000Base-X (SFP version only)
PoE standard supported	IEEE 802.3 af
LAN Mode	Dual Subnets or Network Redundancy
Connector ports	2x 10/100BASE-T(X) RJ-45 or 2x 100/1000 Base-X SFP Slots (SFP version)
Serial Interface
Connector	D-Sub9 RS-232/422/485 software selectable (DB models) 5.08mm 5-Pin Terminal block RS-232/422/485 sw selectable (TB models)
Port(s)	4 + 1 console port (RJ45)
Baud rate	1200~921,600 bps software selectable
Parity	None, Odd, Even, Mark, Space
Data bits	7,8 software selectable
Stop Bit	1,2 software selectable
Flow Control	None, Xon/Xoff, RTS/CTS (RS-232 only)
Isolation	3 KV (Sis versions only)
USB Interface
Speed	USB 2.0
Connector	USB A Type *1
Power Characteristic
Connector	7-Pin 5.08mm Lockable Terminal Block
Input Voltage	Dual 12 - 48VDC (non-PoE Models); or through Ethernet Cable (PoE versions)
Input Current (@ 12VDC)	0.65 A
Power Consumption	Approximately 6 W (Max)
Reverse Polarity Protection	Yes
Redundancy	Yes
Relay Output	1A@30 VDC (normal open)
Approval
EMC	FCC Part 15, Subpart B, Class A EN 55032 EN 61000-3-2 EN 61000-3-3 EN 61000-6-2, EN 61000-6-4 EN 55024
Safety	UL61010-2-201
Shock	IEC 60068-2-27
Drop(freefall)	IEC 60068-2-32
Vibration	IEC 60068-2-64
RoHS II	Yes
MTBF	TBD
Warranty	5 Years
Environment
Operating	-40°C ~ 85°C (-40°F ~ 185°F)
Storage	-40°C ~ 85°C (-40°F ~ 185°F)
Humidity	5~95%RH(Non-condensing)
Mechanical
Housing	IP30 SPCC housing
Dimensions (W x H x D)	55mm x 145mm x 113mm
Installation	DIN-Rail or Wall-Mount (optional kit)
Reset Button	Yes
Weight	1000g
Software
Configuration	Atop Management Utility, Web UI, Telnet
Supported Protocol	IPv4, ICMP, TCP, UDP, DHCP Client, SNMPv1,v2c,v3, HTTP, HTTPS, Telnet, RFC2217, Security through IPsec host-to-host or host-to-side VPN with up to 37.9Mbps VPN throughput
VirtualCOM	Windows/Linux redirection software
Modbus Feature
Supported Modes	Ethernet: Modbus TCP Server/Client(or VCOM); Serial: Modbus RTU/ASCII (master/slave)
Maximum number of clients/slaves	Modbus TCP: Maximum 16 clients; Maximum 32 slave connections
Link Mode
TCP Client	Dual destination supports raw-data or VirtualCOM
TCP Server	4 Connections mode supports raw-data; VirtualCOM or reverse Telnet
UDP	Up to 4 Ranges IP