Strain gauge Modbus TCP-IP / Modbus RTU converter module
Availability : 1-2 weeks
R-SG3
Strain gauge Modbus TCP-IP / Modbus RTU converter module
Availability : 1-2 weeks
R-SG3
R-SG3 is a compact converter for strain gauge load cells. Measurement, made using a 4- or 6-wire technique, is available via ModBUS RTU or ModBUS TCP-IP protocols. Load cell sensitivity ranges from 1 to 64 mV/V. The module is a web server configurable. Powered by a 24-bit ADC, the R-SG3 is distinguished by advanced features (piece counter, automatic tare reset, threshold alarm, automatically upgradable firmware) and flexible measurement management (measurements available in both integer and floating point, measurement can be stabilized by noise filter, configurable resolution). The module also supports Peer-To-Peer and ModBUS pass-through functions.
| Power supply | 10..40 Vdc, 19..28 Vac (@50..60 Hz) |
| Power consumption | 1,5 W |
| Insulation | 1.500 Vac a 3 vie |
| Accuracy class | 0,01% |
| Status LED | Tx packet transmission Rx receive packets IO1 status IO2 status Power supply Load cell overload Factory calibration status Ethernet TRF / LNK (Packet transit / Ethernet connection) |
| Input channels | 1 analog channel for reading (and power supply) up to 4 (350 Ω) or 8 (1,000 Ω) strain gauge load cells, 4 or 6-wire connection, equivalent impedance 87 Ω 1DI tare calibration or weight threshold |
| Output channel | 1DO tare calibration or weight threshold |
| Advanced features | Tare Silos function Piece counter function Tare reset function Tare acquisition Stable weighing signaling via Modbus Noise filter Peer-To-Peer Pass-Through |
| Advanced settings | Firmware upgradeable Independent digital I/O Sampling frequency settable at a wide range Alarm threshold with programmable hysteresis Configurable resolution |
| Measurements | ADC 24 bit Ratiometric measurement Floating-point integer value The minimum net weight value Stabilized measurement with noise filter |
| Calibration methods | Factory calibration and calibration with sample weight via web server |
| Measurement / Diagnostics | Sensitivity from 1 to 64 mV/V |
| Thermal drift | 25 ppm/K |
| Interfaces | Nr.1 Ethernet port 100 Mbit baseT su RJ45 Nr.1 RS485 serial port 2-wires, speed up to 115.200 bps |
| Supported protocols | ModBUS RTU, ModBUS TCP-IP |
| Data | EEPROM for configuration parameters, retention time 40 years |
| Connections | Removable screw terminals for conductors up to 2.5 mm² MicroUSB port on the front panel |
| Programming | Web server |
| Protection degree | IP20 |
| Mounting | For DIN rail guide 35 mm DIN 46277 |
| Operating temperature | -20..+65°C |
| Dimension (WxHxD) | 53,3x90x32,2 mm |
| Weight | about 80 g |
| Housing | Nylon 6 preloaded 30% glass fiber, self-extinguishing class V0 |
| Standards | CE |
| Norms | EN 61000-6-4/2002, EN 61000-6-2/2002, EN 61010, EN 60742, IEC 61131 |
