DC-UPS pour condensateurs, primaire : 12 V, secondaire : 12 V, courant: 3, énergie: 1 kJ, dimensions: 92,5x60x116 mm, poids: 0.55 kg
Disponibilité : 1-2 semaines
C-TEC 1203*
Disponibilité : 1-2 semaines
C-TEC 1203*
DC-UPS pour condensateurs, primaire : 12 V, secondaire : 12 V, courant: 3, énergie: 1 kJ, dimensions: 92,5x60x116 mm, poids: 0.55 kg
Short descriptionThe buffered DC power supply of the AC C-TEC series includes ultra-capacitors as energy storage inside the housing. During normal operation this capacitor is charged from AC-mains. The connected DC consumers are supplied as well from AC mains. In case of an interruption of the AC supply, the energy of the ultra-capacitor is realesed regulated. With a dc/dc converter the load is supplied from the capacitor until it is discharged. The backup time depends on the state of charge of the capacitor and the discharge current.
The power supply hast he following characteristics:
|
|---|
| Nominal input voltage | 115 ... 230 V AC ±15% |
| Min. nominal Input voltage for charging operation | 97,8 V ... 264,5 V AC |
| Nominal frequency |
47 ... 63 Hz |
| Max. nominal input current |
0,84 A ... 115 V AC |
| Max. inrush current | 30 A / 2 ms |
| nominal Output current max. | 3 A DC (at 0,94 kJ) |
| nominal Output current at max. energy | 2 A DC (at 1 kJ) |
| Current limitation | 1,05 ... 1,5 x INenn |
| Nominal Output voltage (in mains operation) |
12,3 V DC ± 2 % |
| Output voltage range (in back-up operation) |
11,5 V DC ± 2 % |
| efficiency | 88 % @ (Ue=230 V AC; Ua=24,3 V DC; Ia=INenn) |
| Energy |
1 kJ |
| Protective system |
IP20 a. EN 60529 |
| operational temperature |
-40 ... 60 °C |
| storage temperature |
-40 ... 60 °C |
| Relative humidity |
95 % condensation not permissible |
| Max. mounting height without load reduction | 2000 m above sea level |
| Dimensions (H x W x D) |
152,5 mm x 72 mm x 130mm |
| weight |
0,85 kg |
| Fixation |
Snap-on mounting for DIN top hat rail or mounting bracket for mounting plate |
| Norms and regulations |
EN 50178 EN 60950 |
| UL approval |
UL 508 C22.2 |
