Ethernet | |
Connector | RJ-45 |
Port(s) | 4 |
Transmission Rate | 10/100 Mbps |
Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/ 100BASE-FX |
Auto MDI/MDI-X | Yes |
Optical Fiber | |
Connector | SC (EH2305-Fs) ST (EH2305-Fm) |
Port(s) | 1 |
Transmission Rate | 100 Mbps |
Fiber Type | Single-mode (EH2305-1Fs) Multi-mode (EH2305-1Fm) |
Cable Requirements | 9/125μm (EH2305-1Fs) 50/125μm, 62.5/125μm (EH2305-1Fm) |
Fiber Wavelength | 1310nm |
Tx Output Power | -7 ~ -15 dBm (EH2305-Fs) -14 ~ -19 dBm (EH2305-Fm) |
Rx Sensitivity | -32 dBm |
Fiber Distance | 20km (EH2305-Fs) 2km (EH2305-Fm) |
Power | |
Connector | 5.08mm 3-pin Terminal Block |
Input Voltage | 9-30 VDC |
Input Current | 0.60A |
Power Consumption | 5.4W max. |
Reverse Polarity Protection | Yes |
Redundancy | Yes |
Approval | |
EMC | FCC Class A, CE Class A |
EMS | ESD Level 2, RS Level 2, EFT Level 2, Surge Level 2, CS Level 2, PFMF Level1, DIP. |
Safety | UL60950-1 |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-64 |
Protection | IP30 |
Environment | |
Operating | -10°C~70°C (14°~158°F) |
Storage | -40°~85°C (-40°~185°F) |
Humidity | 5~95%RH(Non-condensing) |
Mechanical | |
(W x H x D) | 45.2mm x90mm x 78mm |
Material | Aluminum |
Installation | DIN Rail, Wall mount (optional) |
Reset Button | No |
Weight | 255g |
Warranty | 5 years |