16 CH DI / 8 CH DO module / Ethernet I/O module
beschikbaarheid: 1-2 weken
R-16DI-8DO
16 CH DI / 8 CH DO module / Ethernet I/O module
beschikbaarheid: 1-2 weken
R-16DI-8DO
R-16DI-8DO is een digitale gemengde I/O module met dubbele 10/100 Mbps Ethernet-poort voor Daisy Chain verbinding en een Micro USB programmeerpoort aan de voorzijde. De R-16DI-8DO ondersteunt zowel ModBUS TCP-IP als seriële communicatie met het ModBUS RTU-protocol.
- input kanalen: 16 digitale PNP of NPN
- output kanalen: 8 NO contacten 30 Vac/dc - 1A
- ondersteunde protocollen: ModBUS RTU, ModBUS TCP-IP, http
- verbinding: Dual Daisy Chain Ethernet verbinding;
LAN-foutbypass (actieve verbinding tussen de 2 Ethernet-
poorten van het apparaat in geval van spanningsuitval;
max. 32 peer-to-peer regels (I/O spiegel)
- ModBUS Passthrough (TCP-IP naar RS485)
- identificatie en configuratie IP, MAC, Firmware via SDD-tool
- geheugen: FeRAM voor de tellers backup
- communicatie interfaces: 2 x Ethernet-poorten 10/100 baseT
op RJ45 (met fout-bypass LAN-functie) ; 1 x RS485-poort
op klemmen, 1x Micro USB
- communicatie snelheid: tot 115.200 bps (RS485) /
100 Mbps (TCP-IP)
- programmering: SENECA Studio - Embedded Web Server
- voedingsspanning: 10..40 Vdc; 19..28 Vac
- hulpspanningsuitgang: 12 Vdc / 40 mA
- galvanische scheiding input / output: 1.5 kVac
- montage: op DIN-rail, wand- of paneelmontage
| Power supply | 10..40 Vdc; 19..28 Vac |
| Auxiliary voltage output | 12 Vdc / 40 mA |
| Max. absorption | 3 W |
| Max insulation | 1,5 kVac |
| LED status indicators | Power supply I/O's status STS (IP / DHCP address) RX / TX (Data Rx/Tx via RS485) Ethernet TRF / LNK |
| Input channels | 16 DI tipo: PNP con alim. interna/esterna, NPN con alim. Interna tensione: Soglia OFF / ON: <8 V; > 9 V frequenza max: 5 kHz, contatori ritentivi 32 bit corrente assorbita: 2,25 mA conformità: IEC 6113-2 Type 1 & 3 |
| Output channels | 8 DO isolated one each other type: SPST relays contact Voltage/Current mx: 30 V ac-dc / 1 A Response time: 20 ms (P2P) Duration of contacts: 5*106 op. mec. / 105 op. with load |
| Supported protocols | ModBUS RTU, ModBUS TCP-IP, http |
| Features | Dual Daisy Chain Ethernet Connection LAN fault bypass (active connection between the two Ethernet ports of the device in case of power failure) Max 32 Peer to Peer Rules (I/O Mirror) - No Master required Frequency Meters, TON, TOFF, Period ModBUS Passthrough (TCP-IP to RS485) Identification and configuration IP, MAC, Firmware via SDD tool |
| Memory | FeRAM for counters backup |
| Communication interfaces | Nr. 2 Ethernet ports (with fault-bypass LAN function) 10/100 baseT on RJ45 Nr. 1 RS485 port on terminals M23-M24-M25 Nr. 1 Micro USB (programming) |
| Communication speed | Up to 115.200 bps (RS485) / 100 Mbps (TCP-IP) |
| ModBUS communication | Up to 64 nodes without repeater and max speed 115 kbps |
| Programming | SENECA Studio (configuration tool) Embedded Web Server |
| Protection degree | IP20 |
| Housing | Material PC / ABS self-extinguishing UL94-V0, black color |
| Connections | Terminals pitch 3.5 mm, Micro USB connector and double RJ45 connector |
| Mounting | On DIN rail EN 60715, wall-mounted / panel-mounted |
| Operating temperature | -20..+65°C |
| Dimension (WxHxD) | 106 x 90 x 32 mm |
| Weight | 170 g |
| Certifications | CE |
| Norms | EN61000-6-4, EN61000-6-2, EN61010-1 |
